Melco Design Shop Pro Free Download

1. Melco Design Shop Pro Crack
2. Melco Designshop V10 Pro Plus Price

Before loading your software, make sure that you have.Loading the software onto the PC requires the use of a DVD drive. Once the DVD is inserted, the software installer will usually walk you through the loading process step by step.Because this portion of the setup will require you to restart your computer, and print them off to have easier access for the configuration of the Windows environment and loading of Melco software. Security Keys (Dongles)When looking at the DVD, understand that it contains many different programs from Melco. If you purchased DesignShop Pro+, but the disk only says “DesignShop”, do not worry. All levels of the software are contained on the disk. It is the security key, or dongle, that controls the level.

The security keys will be asked for during the installation process. However, not all levels of software require the dongles. Installing the SoftwareTo install the AMAYA OS software, insert the DVD into the DVD drive of your PC. Most PCs will automatically run the DVD and begin the installer.

From here, walk through the steps as prompted by the installer. Run the Setup. If the DVD did not begin running, an AutoPlay window will pop up. Choose the 'Run setup.exe' from the options provided.Install the Security Key Drivers. If this is the first time installing the software, a window will pop up asking about security keys. If your level of software requires security keys and they came with your software, click Yes.

If you are not running software that requires a security key, click No. A warning will pop up asking you to attach the security key(s). When you attach them to your computer, the computer may try to automatically load drivers. Should any 'Hardware Found' notices occur, please cancel them. Attach your security key(s).

The keys will be labeled with a tag. The tag will specified which software it is for and the serial number. If a 'Hardware Found' notice should occur, please cancel it or close it. A question window will pop up asking you to verify that you attached the security keys. Click Yes. A warning will pop up stating that the install process will begin. Click OK to begin the installation.

If a window stating that the program might not have installed correctly pops up, please cancel it. In the Sentinel Protection Installer window, click Next to begin the installation of the security key drivers.

Continue the installation process. Click Finish to complete the installation of the drivers, and exit the wizard.

Restart your computer before installing the rest of your software.Install AMAYA OSOnce the computer has been restarted, you may continue installing software. If the DVD did not begin running, eject and reinsert it. An AutoPlay window should pop up. Choose the 'Run setup.exe' from the options provided.

In a new installation of Windows 8, you may be asked to install the.NET Framework. Please choose to 'Download and install this feature'. In the setup window, check only the software that you purchased from Melco. Note that the software names are not level-specific. Placing a check mark beside 'AMAYA - AMAYA OS' will load AMAYA OS Lite, SE, or Flex+ depending on the presence or level of your security keys. The same applies for DesignShop.Since you are installing AMAYA OS, make sure that is checked.

If you purchased and would like to install DesignShop as well, check that too. Click Next. A setup confirmation window will appear. Click Next to begin installation. The AMAYA OS InstallShield Wizard will start. Click Next to continue. Read and Agree to the license agreement by clicking Yes.

Select the options you want to install. It is recommended to install the Program Files and the Sample Designs. Click Next. Select if you want to install the software for just you or everybody who logs into the computer. Click Next. Confirm the installation location. Melco recommends the default location.

Melco Design Shop Pro Crack

Click Next. Confirm the design installation location. Melco recommends the default location. Click Next.

Review the chosen settings and click Next to continue and begin the file copying. An 'Extracting Files' window will pop up. If SQL Server is installed on your computer, the next few steps will be skipped. If not, SQL Server will be installed as described. In Windows 8, you may see a window that explains some compatibility issues. Check the box to prevent the message from appearing again and select 'Run the program without getting help'. The installation pop up will inform you that the SQL Server is about to be installed.

It is important to accept the default settings through the rest of the installation.

Working with Graphics in DesignShop Working with Graphics(Available in DesignShop and higher product levels)Before you begin digitizing, you may want to have animage on the screen. This can be done by scanning a new design or loadingan existing graphic image file. LoadingOpen Graphics VideoYou can load an existing graphic image by selectingFile-Open or by clicking the Open button. Then browse your computer's directories to findthe desired graphic.NOTE:(You can also select File-Insertor click the Insert button.)Use the following tables to determine which graphic file types can beopened and saved in the different levels of DesignShop. (See Bitmap vs.Vector Images for an explanation of the differences between bitmap andvector file formats). After digitizing stitches in a design, thegraphic is automatically saved with the project file (.ofm).However, if you are saving to a floppy disk,you must save them separately.

Melco Designshop V10 Pro Plus Price

Scanning(DesignShop Pro and DesignShop Pro + product levels only)The other option is to scan an image directly into DesignShop. The scanningfunction allows you to scan a design directly into DesignShop for on-screendigitizing. This function works with any scanner that complies with theTWAIN scanning industry standard communications format.

You may buy anyTWAIN compatible scanner to implement scanning in DesignShop.NOTE:TWAIN 32 compatible scanners are not the same as TWAIN compatible scannersand cannot be implemented from the DesignShop program.NOTE:Be advisedthat Melco cannot and does not provide technical support for any scannersin the marketplace. Any technical assistance that may be required withthe scanner you purchase must be obtained through the scanner dealer.If you attempt to use a scanner that does not comply with TWAIN, youwill not be able to access the scanning program directly from the DesignShop program.

You must go into the scanning program independent from DesignShop to perform the scanning operation. Then you will be able to loadany properly saved graphic files that have been scanned with that scanner.The only requirement for loading a graphic file is that the file formatis one of the formats supported by DesignShop. The graphic load and savefunctions support most industry standard graphic formats. See the belowsection on loading for information on which formats are supported.An additional feature in the on-screen digitizing and scanning optionallows you to import graphical data from the clipboard to the DesignShopView Window. (using the Copy and Pastefunctions). This feature allows you to import graphics from any Windows-basedapplication.Once loaded into the View Window,images can be scaled, rotated, dimmed, and zoomed to give you maximumflexibility in displaying your image for digitizing a design on screen.

Select ScannerThis function need only be performed when you start the scanning processfor the first time. You will not need to return to this function unlessyou add a scanner or want to change to a different scanner that alreadyexists in the system. The last scanner you select in this function willremain the 'default' scanner indefinitely.If you have just opened DesignShop, select File-New.